Table 5-1. Front-Panel Part Description
ITEM
DESCRIPTION
4
/MAX BUTTON
During the run mode, press the
/MAX
button to recall the
PEAK
reading
since the last press of the
RESET
button. To return to the current readings
without resetting the
PEAK
reading, press the
/MAX
button. To reset the
PEAK
reading, press the
RESET
button.
During the configuration mode, use the
▲
/MAX
button to change the values of
the flashing digit shown on the display and/or toggle between menu choices,
such as
“R.1=F”
or
“R.1=C”
.
When configuring your setpoint values, press the
▲
/MAX
button to increment
the flashing digit from 0 to 9 by 1's.
5
/DEV BUTTON
During the run mode press the
/DEV
button to display the deviation from
setpoint 1.
When configuring your setpoint values, press the
/DEV
button to scroll to the
next digit.
6
MENU BUTTON
In the run mode, press the
MENU
button to terminate the current measuring
process and enter you into the configuration mode. (Note: only if you have
installed the lockout jumpers on the main board.)
In the configuration mode, press the
MENU
button to store changes in the non-
volatile memory and then advance you to the next menu item.
7
RESET BUTTON
In the run mode, if you hard reset (press the
MENU
button followed by the
RESET
button) or power off/on the meter, it shows
“RST”
, followed by
“T/C”
.
In the run mode, press the
RESET
button to reset the setpoints. The meter
shows
“SP.RS”
and returns to the run mode.
In the configuration mode, press the
RESET
button once to review the previous
menu. Press the
RESET
button twice to perform a hard reset and return to the
run mode.
In the peak mode, press the
RESET
button to reset peak value. The meter
shows
“PK.RS”
and return to the run mode.
When in setpoint or configuration mode, if the meter shows 9999 or -1999 with
all flashing digits, the value has overflowed. Press the
/MAX
button to start
a new value.
5
Summary of Contents for CN1001-TC
Page 46: ...42 NOTES...