m m
H g
m m
H g
/m
i n
S Y S
D IA
PLU
SE
ME M
S T O
P
S TA
R T
1. Avoid dropping, slamming, or throwing the unit.
2. Avoid extreme temperatures. Do not expose unit directly under sunshine.
3. When cleaning the unit, use a soft fabric and lightly wipe with mild detergent.
Use a damp cloth to remove dirt and excess detergent.
Operating Environment
Humidity
Temperature
1
0
℃
℃
℉
℉
~ 40 (50 ~104 )
15% ~90%RH
Pressure
Atmospheric Pressure
Product Description
Model
Display
Measurement Method
Measurement Range
Pulse
Measurement Accuracy
Pressurization
Memory
Function
Power Source
Battery Life
Unit Weight
Unit Dimensions
Cuff Circumference
Oscillometric Method
Pressure
Pressure
Pulse
Arm-type Fully Automatic Digital Blood Pressure Monitor
BSP-11
LCD Digital Display
Size: 62.7mm
×
46.4mm (2.47" x 1.83")
0mmHg
～
300mmHg
30 to 180 Beats/Minute
±
3mmHg
±
5%
120 Memories
Low Battery Detection
Automatic Power-Off
4 AAA batteries or Medical AC Aadapter(DC6.0V, 600mA)
(recommended, not provided)
Approximately 2 m
at 3 tests per day
onths
Approx.360g (12.7oz.) (excluding battery)
Approx.140 x 98 x 48mm (5.51
" x 3.86" x 1.89" )(L x W x H)
Approx.135 (W)
×
485(L) mm
(Medium cuff: Fits arm circumference 22-36 cm)
Automatic Pressurization
mm
Hg
mm
Hg
/m
in
SY
S
DI
A
PL
US
E
ME
M
ST
OP
ST
AR
T
m m
H g
m m
H g
/m
i n
S Y S
D IA
PLU
SE
ME M
S T O
P
S TA
R T
m m
H g
m m
H g
/m
i n
S Y S
D IA
PLU
SE
ME M
S T O
P
S TA
R T
4.
Do not soak cuff in water!
5.
Cuff Cleaning:
Apply a small amount of rubbing alcohol to
a soft cloth to clean cuff's surface. Use a damp cloth (water-based) to wipe clean.
Allow cuff to dry naturally at room temperature.
Do not use petrol, thinners or similar solvents.
6. Remove batteries when not in operation for an extended period of time.
7. Do not disassemble product.
8. It is recommended the performance should be checked every 2 years.
9. Expected service life: Approximately three years at 10 tests per day.
This Blood Pressure Monitor complies with the European regulations .This blood
pressure monitor also complies with mainly following standards
(included but not limited):
Safety standard:
EN 60601-1 Medical electrical equipment part 1: General requirements for safety
EMC standard:
EN 60601-1-2 Medical electrical equipment part 1-2: General requirements for
safety- Collateral standard: Electromagnetic compatibility- Requirements and tests
Performance standards:
EN 1060-1 Non-invasive sphygmomanometers - General requirements
EN 1060-3 Non-invasive sphygmomanometers - Supplementary requirements for
electromechanical blood pressure measuring systems.
EN 1060-4 Non-invasive sphygmomanometers - Test procedures to determine the overall
system accuracy of automated non-invasive sphygmomanometers.
C or r ect D isposal of T his P r oduct
(Waste Electrical & Electronic Equipment)
This marking shown on the product indicates that it should not be disposed with other
household waste at the end of its life. To prevent potential harm to the environment or to
human health, please separate this product from other types of wastes and recycle it
responsibly. When disposing this type of product, contact the retailer where product was
purchased or contact your local government office for details regarding how this item can
be disposed in an environmentally safe recycling center.
Business users should contact their supplier and check the terms and conditions of the
purchasing agreement. This product should not be mixed with other commercial wastes
for disposal. This product is free of hazardous materials.
Storage Environment
Humidity
Classification:
Temperature:
-20 ~55 (-4 ~131 )
℃
℃
℉
℉
15% ~90%RH
Internal Powered Equipment,Type BF ,Cuff is the Applied Part
Specifications are subject to change without notice.
IP 22
Ingress Protection Rating:
Maintenance
Maintenance
Specifications
Specifications
21
22
23
24
