U.S. Patent No. 8,856,780
XX-XX
PAGE X-X
XX-XX
PAGE X-X
ADS-AL(TB)-FM2
PAGE 1-4
MODULE PROGRAMMING PROCEDURE - WITH ONE OEM KEY & KLON
1
Insert key into ignition.
2
Turn key to ON position.
ON
!
If the LED begins to fl ash RED/GREEN, the key has an
80-bit encryption that is not covered by KLON.
4
Press and hold programming
button until LED truns solid
RED, then release.
5
Wait, LED will fl ash GREEN.
6
Turn key to OFF position.
OFF
7
Disconnect all connectors
from module except the black
4-PIN standard or optional data
connector.
8
Disconnect the black 4-PIN
standard or optional data
connector.
13
Insert key into ignition.
14
Turn key to ON position.
ON
16
Turn key to OFF position.
OFF
15
Wait, LED will turn solid GREEN
for 2 seconds.
17
Module Programming
Procedure completed.
10
Connect module to computer.
Æ
11
Proceed with extended
programming.
12
Connect module to vehicle.
Æ
9
Remove module from vehicle.
Æ
3
If LED turns solid GREEN for 2
seconds. Module Programming
Procedure completed.
If LED turns solid RED, proceed
with following step within 5
seconds, after LED turns OFF.
Page 14 of 15
ol-al(mib)-Fm2-en
20141105
inStall GUide
automotive data Solutions inc. © 2014
ImmobIlIzer bypass
Ford/Mazda
Doc. No.: ##17294##
