background image

 
 
 

Panasonic Electric Works Fire & Security Technology Europe AB 

 

Jungmansgatan 12, SE-211 19 Malmö, Sweden 

Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99 

[email protected] • www.panasonic-fire-security.com 

 

Fire alarm systems 

Analog base 

3312F / FL 

 

Common base for the different analog detectors 

 

Fast connectors  

 

Label holder recess  

Common base 

The analog base 3312F / FL is connected to 
a COM loop.  Analog heat, smoke and multi 
detector types 33xx / 43xx can be plugged in 
the base.  (See Product Leaflet for the 
detector type respectively, for type of base.)  

Fast connectors 

3312F has fast connectors (blue) for the 
COM loop (in/out).  3312FL also has fast 
connectors (grey) for an external indicator 
(LED), e.g. 2218. 

Label holder 

A label holder could be mounted in the base 
(in the label holder recess).  The label holder 
is intended for a label showing "zone-
address" or "technical number" information, 
which can be read also when the detector is 
plugged in the base. 

Miscellaneous 

The base has an address label (Al) where the 
detector's COM loop address is to be 
written. 

Individual fault signal is obtained if wrong 
type of detector (compared with the 
programming) is plugged in the base or if 
the detector is unplugged. 

When a detector with a locking screw is 
plugged in the base, the detector can be 
locked in its base to prevent theft. 

The position of the detector's built-in LED is 
marked in the base for correct mounting 
position of the base. 

For more information regarding detector 
types, connections, etc. see Planning 
Instructions and connection diagrams for the 
system respectively. 

Product applications 

Used for analog detectors in the systems 

EBL512 / 128

 / 1000 / 2000.  

The base is intended for indoor use and in 
dry premises. 

Reviews: