Page 5
6) Begin your cut by slowly pushing the saw into the stone. Note the
G2 will cut in both directions but cutting from left to right
will reduce lifting forces. When seam cutting, cut from right to left
(climb cutting). This will reduce surfaces chipping.
7) Note: Step cutting has less chance of saw cut wandering in the cut.
8) Once you have initiated the cut you must not go too slow or the
diamonds on the blade will glaze over, and the cutting speed will drop
dramatically.
9)
Example:
On a 2 cm thick slab of Absolute Black granite try to
maintain a cutting speed of about 6 FPM (1.8 meter per minute) or faster.
Summary of Contents for Blue Ripper G2
Page 8: ...Page 8...
