Page 2
Operating/Safety Instructions
IMPORTANT: Read Before Operating Equipment
To avoid accidents or injury, keep work area clean, well lit, and well
ventilated.
Always wear eye, hand, ear, foot and all other appropriate protective
apparel when operating saw.
Keep all other people, children, and small farm animals away while
operating saw.
Use only properly grounded, GFCI protected electrical outlet. GFCI
must be tested every 2 months.
Warning
: Do NOT turn machine on or off with the GFCI safety switch.
Turn machine toggle switch off before resetting the GFCI.
Ensure that the electrical system in your work location meets all codes
and regulations prior to operating saw.
Do not modify the plug on the saw or use any adapters between the saw
and the electrical outlet.
Do not allow water to run directly on the motor or any other electrical
component.
If power cord or any other part of the saw is damaged, discontinue use
immediately until damaged parts can be replaced.
Keep saw blade clear of clothing, jewelry, hair, cords, hoses, or any other
object while in operation.
Ensure that the saw is switched off (trigger released) before plugging or
unplugging it.
Ensure that blade is clamped firmly between flanges and spinning freely
prior to operating.
Keep hands on provided handels of the saw and away from the blade
while operating.
Never force the saw if it seems to be stuck or if it seems to be moving
with difficulty.
Use only blades of correct size and shape. Do not modify blades.
Do not force bolts; most have been assembled with a threadlocking
adhesive for safety.
Summary of Contents for Blue Ripper G2
Page 8: ...Page 8...
