Page 4
Typical Operation:
Note: For fastest cutting speeds, it is recommended that you lay your slab
on top of a foam sheet at least 1” (3cm) thick. (1.5” (4cm) is
preferred for less crumbling). But you can use standard stone cutting
tables.
1) Lay the rail on the slab along the line to be cut. Note this saw can cut
on either side of our rails (it has a 1” offset)
2) Allow the rails to overhang enough for the blade to clear the stone
where you will begin your cut. It may be necessary to clamp the rails to
the stone to prevent wandering. Clamp onto provided angle bolted to
one side of rail.
3) Turn the water valve on and adjust desired flow.
4) Turn saw on before blade touches the stone. Do not stand directly in
front of or behind the blade while cutting.
5) Unlock and lower blade to desired cut depth by rotating the vertical
adjustment system locking handle counter-clockwise then lock the saw
height by rotating the same handle clockwise
Summary of Contents for Blue Ripper G2
Page 8: ...Page 8...
