Omega Altise APC12, User Manual

Page: 9 / 14

omega altise
Fan Mode
The Fan or ventilation mode “moves” the air allowing for the recycling of air much like a general fan.
•
Press MODE button to choose FAN mode.
•
Press SPEED button to select the fan speed, either low or high.
•
The temperature cannot be set.
Cool Mode
The cooling mode uses a refrigerated circuit (compressor) to cool the room by transferring the heat from the
inside to the outside through the air exhaust hose and cooling the air that it returns to the room.
•
Press MODE button to choose COOL mode.
•
In COOL mode the temperature of this unit is pre-set to 24
0
C.
•
Press UP or DOWN buttons or to set the desired temperature between 18-32
0
C. As you set the
temperature the display window will show the temperature you set. Otherwise it will show the ambient
temperature of the room.
•
Press SPEED button or to select the fan speed, either low or high.
•
In COOL mode the unit will use Aqua Chill technology to improve the cooling efficiency of the unit. See
the Aqua Chill section for further details.
Please Note: The temperature adjustment setting is not a direct correlation to the ambient room
temperature. For example, adjusting the setting to 18
0
C will not necessarily bring the ambient room
temperature down to 18
0
C.
Heat Mode (APC12RC only)
The heating mode uses a reversed refrigerated circuit (compressor) to warm the room by transferring the
cold from the inside to the outside through the air exhaust hose and warming the air that it returns to the
room.
•
Press MODE button to choose HEAT mode.
•
In HEAT mode the temperature of this unit is pre-set to 20
0
C.
•
Press UP or DOWN buttons or to set the desired temperature between 18-32
0
C. As you set the
temperature the display window will show the temperature you set. Otherwise it will show the ambient
temperature of the room.
•
Press SPEED button or to select the fan speed, either low or high.
Timer – On
•
When the unit is switched off, press TIMER button to set timer-on.
•
Press UP or DOWN buttons to adjust the time from 1hr to 24hrs.
•
Time will vary 1hr accordingly for each press of either the UP or DOWN buttons.
•
At this stage also select the mode/settings that you wish the unit to turn on with.
•
When the set time is reached the unit will turn on automatically.
9