Omcan J-110, Instruction Manual, Page: 10 / 20

10
Troubleshooting
TROUBLESHOOTING GUIDE
Many potential problems can be avoided through proper care and maintenance. If you do experience machine
vibration or other problems, consult this guide before calling for service.
Trouble Possible Cause Solution
Machine won’t start. No power to machine. Turn OFF and UNPLUG.
Check circuit breaker.
Check plug at outlet (Check the
outlet by plugging something else
into it).
Manual overload protection
tripped.
Turn OFF and UNPLUG. Let
machine cool down.
Reset manual overload button.
Damaged electrical cord. Turn OFF and UNPLUG. Check
electrical cord for any breaks in
the insulation or open circuits. If
problem found call Omcan.
Loose electrical wires at switch or
switch damaged (if switch is in the
ON position and light is off).
Turn OFF and UNPLUG. Check
wiring at switch. Call Omcan.
Maintenance
The 16 blade cutter plate will need replacing periodically. The indications of a dull cutter plate are:
1. Reduction in juice yield (more produce than usual to make a drink).
2. Vibration during juicing (if filter is clean).
3. Pulp that is much wetter than usual.
Omcan sells replacement parts. Please feel free to call if you have any questions about when and how
to get a new cutter plate.