background image

8

Safety and Warranty

changes carried out on the machine without the written authorization of Omcan;

•  Defects and/or failures in case of non-original spare parts not having equivalent manufacturing 

characteristics.

WARRANTY EXPIRATION

WARNING!

 The warranty of Omcan 

COMPLETELY EXPIRES

:

• 

If any rule, instruction, recommendation, warning, prohibition listed by Omcan or their commercial network 

in any form (oral, written, by phone, fax or e-mail, on paper, electronic, magnetic, optical, audiovisual 

supports, etc.); or any rule in this handbook is infringed;

• 

With the improper or unreasonable use of the machine;

•  If the machine is modified in any way, even slightly;

• 

If non-original spare parts or accessories of Omcan are assembled;

•  If the machine is modified, without the written approval of Omcan, even if this would occur after 

recommendations or orders of public or private authorities for control and prevention;

• 

If the machine is repaired by staff who is not directly authorized by Omcan; inexperienced staff and 

unauthorized staff must not perform any repair or extraordinary maintenance;

• 

If the damage to the machine is attributable to carelessness and negligence;

• 

If the machine has not been regularly purchased and paid according to contractual agreements existing 

with Omcan or with the authorized retailers;

• 

If there is no invoice or receipt proving the purchase;

• 

Any missed or delayed payment implies the expiry of the validity of the warranty granted by Omcan for the 

whole period of the missed or delayed payment;

• 

The periods relevant to the missed or delayed payment cannot be recovered after the settlement of the 

debt; the warranty of Omcan expires at this date.

1 YEAR PARTS AND LABOR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either 

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the 

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty.

For suitable recycling, we suggest disposing of the products separately (differentiated waste) 

according to the local standards.

Summary of Contents for BS-IT-1524

























Reviews: