background image

12

Installation

BLADE REPLACEMENT

1. 

Make sure that the machine is switched off (rotational device positioned “O” = OFF);

2.  Make sure that the machine is not working (blade has stopped);

3. 

Open the door (H) at least 90°;

4.  Disassemble the protection device (R) from the blade necessary to the blade guide (G);

5.  Unscrew the black knob (T) located on the top to decrease the interaxle between the two pulleys and 

reduce the tension of the blade until it easily and manually comes out from pulleys;

6. 

Extract the blade from the pulleys making sure not to hurt yourself (do not work bare hands, use the 

prescribed protective gloves) and put it in a safe place not accessible to children and non-trained 

personnel;

7.  Insert a new blade in the pulleys making sure not to hurt yourself (do not work bare hands, but use the 

prescribed protective gloves) inserting it in the pulleys by shifting it as opposed to those performed to 

drawing it out;

8.  Check the correct positioning of the new blade on the two pulleys;

9.  Screw the black knob located on the top to increase the interaxle between the two pulleys and therefore 

increase the tension of the blade up to the desired value and in any case the blade cannot be manually 

extracted from the pulleys;

10. Re-assemble and adjust the protection device (R) of the blade integral to the blade guide;

11. 

Close the door (H) towards the framework body (C);

Summary of Contents for BS-IT-1524

























Reviews: