5
Safety and Warranty
Shipping and labour costs are not included in the warranty.
In order to make use of the legal warranty the user must strictly observe the instructions contained in this
manual, as outlined in Directive 1999/44/CE, and more specifically:
•
Always operate the oven according to its intended use;
•
Always carry out constant and accurate maintenance;
•
Allow only skilled and properly trained personnel to use the oven
Failure to comply with the instructions provided in this manual will cause the warranty to be considered
immediately null and void.
SAFETY RECOMMENDATIONS
WARNINGS FOR THE INSTALLER
Check that the location of the machine is in compliance with local, national and European regulations.
•
Adhere to the instructions in this manual.
•
Do not execute electrical connections using temporary or non insulated cables.
•
Check that the ground connection of the electric system is working properly.
•
Always use individual safety devices and other means of protection in compliance with the law.
WARNING FOR THE USER
The conditions of the area where the machine is to be installed must have the following characteristics:
•
The area must be dry.
•
Water and heat sources must be at a safe and proper distance.
•
Ventilation and lighting must be suitable and comply with the hygiene and safety standards foreseen by
current laws.
• The floor must be flat and compact to facilitate thorough cleaning.
•
There must be no obstacles of any kind in the immediate vicinity of the machine that could affect the
machine's normal ventilation.
In addition, the user must:
•
Make sure to keep children away from the machine while it is operating.
•
Adhere to the instructions in this manual.
•
Not remove or tamper with the safety devices on the machine.
•
Always pay careful attention to the work at hand and do not use the machine absentmindedly.
•
Perform all operations with maximum safety and calm.
•
Respect the instructions and warnings displayed on the machine labels.
The labels are accident prevention devices and must therefore always be perfectly legible. Should they be
damaged and illegible, it is mandatory to replace them requesting replacements from the Manufacturer.
•
At the end of each working shift, disconnect electrical power before cleaning or doing any maintenance or
transfer operations.
WARNING: while the machine is under working, it is strictly forbidden to remove the security
protections, because of the presence of moving parts which can cause hands crashing.
