8
Operation
OVEN INSTALLATION’S LOCATION
The picture below shows the minimum distances that must be respected when positioning the machine in order
to facilitate its use, cleaning and maintenance.
The minimum distance between the machine and surrounding walls or other devices must be of approximately
50 cm.
INSTALLATION
Installation must be executed by qualified personnel in compliance with local, national and European
regulations.
MACHINE POSITIONING
Ensure that the machine is put on a flat stand with a suitable carrying capacity.
After unpacking the rolling machine, put it in the prepared location, keeping in mind the minimum distances
to be respected. Remove any polystyrene protections and take off the protecting film. Avoid using tools which
might damage the surfaces.
EQUIPMENT HOOK-UP
Electrical connection
Just connect the electricity-supply cable to the electricity network.
The electrical outlet must be easily accessible, no moving should be necessary.
The electrical connection (plug) must be easily accessible, also after oven installation.
The distance between the oven and the socket must be suitable, as not to cause tension in the power supply
cable. The cable, moreover, must not be located beneath the machine support base.
If the electrical power supply cable is damaged, it must be replaced by the technical assistance service
or by a qualified technician to prevent any risks.
Ground connection It is mandatory that the electrical system is equipped with a ground connection.
Min. 50 cm
Min. 50 cm
Min. 50 cm
Min. 50 cm
