![background image](http://html1.mh-extra.com/html/omcan/19921/19921_instruction-manual_736373009.webp)
9
Operation
Maintenance
Troubleshooting
“0”.
USING THE SIEVE
The extractable sieve “1” in stainless steel enables obtaining a uniformly grated product, avoiding sieving. It
must be requested upon ordering the machine.
ATTENTION!
Every maintenance and cleaning operation on the grater must only be done with the machine at a standstill,
disconnected from the power supply. The area where maintenance operations are carried out must always be
kept clean and dry. Do not allow unauthorized personnel to work on the machine. Any replacement of parts
must be made with original spare parts at authorized work shops or directly by the manufacturer.
ATTENTION!
Disconnect the machine from the electrical supply before cleaning it. Do not clean the machine with jets of
water. Only use non-toxic detergents, designated for cleaning components for use with food products.
PUTTING OUT OF ORDER
The machine is made of materials such as aluminum, steel and copper; therefore they do not require particular
operations for scrapping. Therefore use companies specialized in trash disposal, separating the components
according to material.
Problems
Causes
Solutions
The machine does not start.
The differential switch is not set at
“0”.
Put the switch at “I”.
The presser is in a high position.
Lower the presser.
The microswitch installed on the
grater inlet does not work.
Call technical assistance.
The start pushbutton does not
work.
The electrical motor or the
electronic card are faulty.