![background image](http://html1.mh-extra.com/html/omcan/19921/19921_instruction-manual_736373007.webp)
7
Installation
Operation
MOVING THE MACHINE
ATTENTION!
Lift the machine with a forklift of suitable capacity. Check the stability and positioning of the weight on the
forks, especially along uneven, slippery or inclined paths. When moving the machine keep the load as low as
possible to guarantee greater stability and visibility. Stabilize the grip by widening the forks of the forklift.
CONNECTION TO THE ELECTRICAL SYSTEM
ATTENTION!
Make sure the electrical source corresponds to the value reported on the identification plate of the machine.
Each operation should be carried out only by specialized personnel authorized by the appropriate supervisor.
Connect the machine to a network with an efficient floor plug.
Connect the cable to the 230 V/50 Hz single-phase electrical supply network, inserting a 16-Amp
magnetothermic differential switch. For machines with voltages different from those mentioned consult the
manufacturer. If the feeding cable needs to be extended, use a cable with the same section as the one
supplied by the manufacturer.
LIST OF COMMANDS
1. Stop pushbutton.
- Stop pushbutton: black color.
- Press to stop the machine.
- The led on the pushbutton lights
up only when the stop pushbutton is
pressed (4).
2. Start pushbutton.
- Start pushbutton: gray color.
- Press to start the machine.
3. Lit indicator of connection to the
mains.
- White color.
- It indicates the connection of the
machine to the network.
START UP AND STOP
ATTENTION!
Check that the feeding line corresponds to the value reported on the identification plate of the machine and