8
Operation
that it is outfitted with an efficient floor plug.
1. Put the plug into the electrical outlet.
2. Set the differential switch in position “I”. The
lit indicator, indicating that the machine is
powered, must be illuminated.
3. Press the pushbutton to start and immediately
afterwards press the stop one, checking the
rotation direction of the roller.
NOTE
The presser must be in a low position.
The roller rotation direction must be the same
as the one indicated by the arrow.
CHECKING THE PRESENCE AND EFFICIENCY OF PROTECTIONS AND SAFETIES
1. Microswitch on the lever.
While the machine is running lift the presser until the microswitch intervenes and stops the machine.
Keep the presser still in the point in which the microswitch intervenes and check that the space between
the loading inlet and the presser is such to block fingers from entering. If this is not the case contact an
authorized reseller or the manufacturer.
2. Microswitch on the lever.
While the machine is running extract the plexiglass container and make sure that the machine stops.
CHECKING THE EFFICIENCY OF THE STOP PUSHBUTTON
While the machine is connected to the power supply and the utensil is moving press the pushbutton.
START UP
• Set the differential switch fitted upstream at “I”. The light indicator will light up, indicating that the machine is
powered.
• Press the start pushbutton to start the machine.
Note
If the presser is in an “open” position the machine will not run, therefore it will have to be lowered.
STOP
• Press the stop pushbutton to stop the running of the machine; the light indicator will remain on to indicate
that the machine is powered.
• Then set the differential switch installed upstream at “0”, in this way disconnecting the machine.
Note
Each time a work shift finishes or the machine is left to rest, the differential switch must be left set at
