Omcan 0020-FT, Instruction Manual

Page: 5 / 40

5
Safety and Warranty
- if the machine is tampered with by non authorised staff;
- if components are replaced with non original ones;
- if the instruction in this manual are not carefully followed;
- if the machine surfaces are treated with non suitable products.
• Conserve this manual with care for future information or reference (Fig. n°21).
• The dough mixer must be used only by trained staff with perfect knowledge of the safety standards
contained in this manual.
• If staff turnover is necessary, provide training beforehand.
• The dough mixer must not be used by children or incompetent persons and however by non trained
persons (Fig. n°22).
• Disconnect the machine’s socket from the electric network before carrying out any cleaning or maintenance
operations.
• Carefully valuate the residual risks when intervening for routine dough mixer maintenance or cleaning
(therefore the tank protection is lifted).
• During maintenance or cleaning remain concentrated on the operations in progress.
• Do not use corrosive or flammable substances to clean the dough mixer (Fig. n°23); only use the product
provided.
• To clean, carefully follow the instructions in the “Routine cleaning” chapter.
• Do not wash the dough mixer with jets of water, with rough or abrasive means that can ruin the surfaces.
Do not immerge it in water or other liquids.
• Do not expose the dough mixer to damaging agents: sun, rain, splashes, humidity, ice (Fig. n°24).
• Do not pull the dough mixer or the power cable (Fig. n°25), to disconnect the plug from the socket.
• Regularly check the state of the power cable; a worn cable or however not integral is a serious electrical.
• If the machine is not used for a long period of time, contact the “After Sales Centre” for a test before use.
• If the machine should assume or show signs of malfunctioning, it is recommended that it is not used and do
not intervene directly for repairing but contact “After sales centre”, visible on the back of this manual.
• Do not leave the dough mixer insert if not necessary. Pull out the plug when the machine is not being used.
• Even if the machine has safety systems installed on the dangerous points, do not place hands, arms or any
other part of the body near to the tank and the moving parts inside it.
SAFETY SYSTEMS INSTALLED ON THE MACHINE
MECHANICAL SAFETY SYSTEMS
Regarding the mechanical safety systems, the dough mixer described in this manual conforms to:
• The UL 763 and CSA 22.2 norms.
The safety systems are:
• Lid for rotating tank (Fig. n°28 ref. n°1);
• Tank protection (Fig. n°28 ref. n°2).
ELECTRICAL SAFETY SYSTEMS
Regarding the electrical safety systems, the dough mixer described in this manual conforms to:
• The UL 763 norm;
• The CSA 22.2 norm.