manualshive.com logo in svg

OMB EM 100 DIG, Technical Manual, Page: 13 / 61

Share
Download
OMB EM 100 DIG Technical Manual Download Page 13

FM Transmitter 

Sistemas Electrónicos S.A                                                                                                                       EM 100 DIG

 Technical Manual - v1.2 -  November 2005

        9

1.3  Description of panels. 

The EM-100 DIG Front Panel is very clean and easy to control. The wide alphanumeric display and 
the control keyboard allows a simple self-explanatory menu-driven navigation through the various 
options. A great care was taken in the design of the software to allow natural feeling with the controls 
to allow operation and programming in every respect of the Equipment without needing to 

extensively read this manual. The password management hides some functions and prevents 
tampering with the most critical options and data to unauthorized people. 

Figure 1-2 shows the simple Equipment's Front Panel, indicating all supervision & control elements: 

Figure 1- 2: Transmitter Front  Panel. 

These supervision &control elements are numbered in Figure 1-2 as follows: 

1

 - STANDBY condition indicator LED. 

2

 - Twin-row Alphanumeric dot-matrix LCD display, working directly with Microcontroller unit. 

3

 - Programming & parameter selection keyboard: 

™

 White keyboard to scroll and navigate through the different menus and options. 

™

 OK key (blue). Enter key to confirm some order or command. 

™

 CANCEL key (orange). Escape key to cancel menu or command. 

4

 - ON/STBY switch. This ON/STANDBY key do not power off equipment, which is still locked on 

frequency and ready to transmit as soon the key is  pushed  or  a  remote  command  is  sent. 

5

 - ALARM LEDs PANEL: 

Alarm

 red LED lights on in event of any equipment's alarm condition. 

VSWR

 red LED lights on showing that RF output circuit is overloaded by a severe high VSWR 

condition.

Limiter

 red LED lights on showing too high audio signal level at equipment's input,and 

subsequent operation of baseband peak clipper. 

6

 - DISPLAY CONTRAST potentiometer, to adjust LCD screen backlighting to a comfortable contrast 

level in order to get easy readings. 

Summary of Contents for EM 100 DIG






























































Reviews:

No comments