Turn the guitar over and continue as follows:
5
6
2 3
4
1
1
Clean the body of the guitar below the bridge with soft cloth and your favorite cleaning fluid.
2
Slightly angle the Base upward…
3
…remove the adhesive backing, take the adhesive strip…
4
…and put the adhesive strip under the base. Then press it down on the body of the guitar to
fix it in place.
5
Bend the String-through spacer block insulation sleeve over the bridge…
6
…and then cut it just beyond the bridge so that it is long enough to prevent the string from
touching the metal but short enough so that it will not buzz when you play.
Attaching the Add-On Device to String-Through Body Electric Guitars
16
OMB User Guide - Version 0.I
