3
4
5
6
1
2
1
Remove the back plate.
2
Take the trimmed String-through spacer block and thread the crescent insulation strips
through the string holes, making sure that the open portion faces the bottom of the guitar.
3
Turn the guitar over and thread the flex connector through the small opening below the
bridge…
4
Turn the guitar over again and bend the flex connector over the holes in the string spacer.
5
Insert the guitar strings, one by one, taking care not to rip or damage the flex connector.
6
Replace the back plate.
J
When you next replace your strings you do not have to remove the back plate.
Attaching the Add-On Device to String-Through Body Electric Guitars
15
OMB User Guide - Version 0.I
