Olympus WS 700M, Detailed Instructions

Page: 34 / 92

34
3
EN
Playback
Pla
yback
About music file
In cases where the recorder is unable
to playback music files that have been
transferred to it, check to make sure that the
sampling rate and bit rate are in the range
where playback is possible. Combinations of
sampling rates and bit rates for music files
which the recorder can playback are given
below.
File
format Sampling
frequency
Bit rate
WAV *
format
44.1 kHz 16 bit
MP3
format
MPEG1 Layer3:
32 kHz, 44.1 kHz,
48 kHz
MPEG2 Layer3:
16 kHz, 22.05 kHz,
24 kHz
From 8 kbps up to
320 kbps
WMA
format
8 kHz, 11 kHz,
16 kHz, 22 kHz,
32 kHz, 44.1 kHz,
48 kHz
From 5 kbps up to
320 kbps
* For WS-710M, WS-700M only.
• Variable bitrate MP3 fi les (in which
conversion bitrates can vary) may not
playback properly.
• For WAV fi les, this recorder can only
playback those in the linear PCM format.
WAV fi les other than these cannot be
played back.
• This recorder is compatible with
Microsoft Corporation DRM9, but not
with DRM10.
• Even if the fi le is a compatible format to
playback on the recorder, the recorder
does not support every encoder.
Locating the beginning of the file
While the recorder is during stop
mode or playback mode, press the
9
button.
• The recorder skips to the beginning of
the next file.
While the recorder is during
playback mode, press the
0
button.
• The recorder skips to the beginning of
the current file.
While the recorder is during stop
mode, press the
0
button.
• The recorder skips to the beginning of
the previous file. If the recorder stop
the midway of the file, return to the
beginning of the file.
While the recorder is during
playback mode, press the
0
button twice.
• The recorder skips to the beginning of
the previous file.
Notes
• When you skip to the beginning of the
file during playback, the recorder will
stop at the position of the index mark
and temp mark. The index mark and temp
mark will be skipped when you perform
the operation in stop mode (
☞
P. 35).
• When [ Skip Space ] set to other than
[ File Skip ], the recorder will skip forward/
reverse the specified time, then will start
playback (
☞
P.47, P.55).