Olympus VISERA OTV-S7V, Instructions Manual, Page: 89 / 216

Chapter 5 Operation
83
VISERA VIDEO SYSTEM CENTER OTV-S7V
Camera head, LTF-V3, A500**A series
 Automatic brightness control (CLV-S40/S30/S20, CLD-S
only)
When this instrument is used in combination with a light source which has an
automatic brightness control function, the brightness is adjusted automatically.
1.
Press the light source’s AUTO/MANUAL brightness selector and select
AUTO.
2.
Press the brightness control switches on the light source and set the
brightness level to “3”.
When using the CLV-S40, its brightness level “0” is equal to
the brightness level “3”.
3.
To adjust the brightness of the endoscopic images, refer to “Exposure level”
on page 84.
• The brightness of the endoscopic images does not depend
on the brightness level on the light source.
• When connecting the camera head, LTF-V3 or A500**A
series, the brightness indicators on the CLV-S40 go out.
• If the brightness level on the light source is not set to “3”,
optimum performance will not be obtained.
• Set the light intensity manually when a light source with an
automatic brightness control function is not being used.