Olympus VISERA OTV-S7V, Instructions Manual, Page: 140 / 216

134
Chapter 5 Operation
VISERA VIDEO SYSTEM CENTER OTV-S7V
5.19 Default settings
Users may restore default settings on the OTV-S7V (settings when the
equipment is sent out from the plant). The default settings are given in Tables
5.9, 5.10 and 5.11 below.
 Default OTV-S7V functions
Table 5.9
Function Default setting
Exposure Center (±0)
Focus free ON When a camera head with the focus free function is
connected to the OTV-S7V.
Image enhancement LOW
Color bar OFF
Remote control
switches SW1: RELEASE
REL.+DIG.CAP.
SW2: ENHANCE
SW3: VTR
VTR+DV/DVCPRO
SW4: FREEZE
When using a type A or D
OTV-S7V
When using a type B, C or F
OTV-S7V
When using a type A OTV-S7V
When using a type B, C, D or F
OTV-S7V
Color tone level Red: Center (±0)
Blue: Center (±0)
Color mode 1: XENON NORMAL
Shutter ON When a camera head, LTF-V3 or A500**A series is
connected to the OTV-S7V.
Zoom

1.0
Freeze mode FIELD
Patient data display
(display ID) ON When the ENF-V, CYF-V/VA or HYF-V is connected
to the OTV-S7V.
OFF When a camera head or videoscope other than
above videoscopes is connected to the OTV-S7V.
Auto gain control
(AGC) ON
Iris (exposure area) AUTO When a camera head is connected to the OTV-S7V.