Olympus VISERA OTV-S7V, Instructions Manual, Page: 177 / 216

Chapter 5 Operation
171
VISERA VIDEO SYSTEM CENTER OTV-S7V
 Change the display mode quickly by pressing a key on the
keyboard
1.
Refer to “Auto picture in picture” on page 164 and set “AUTO P IN P” to
“OFF”.
2.
Refer to “Switch mode” on page 167 and set “SWITCH MODE” to
“MODE–CHANGE”.
3.
Refer to Section 5.13, “Setting a function to the keyboard” and set the “P IN
P” function to the “B.O.D.” key on the keyboard.
4.
Pressing the “B.O.D.” key that is set to the “P IN P” function toggles between
“OTV+ext.” and “EXT.+otv”.
When “AUTO P IN P” is set to “ON”, if press the “B.O.D.” key
that is set to the “P IN P” function, the display on the video
monitor is shown in Figure 5.118.
 Change the display mode by operating the menu
1.
Refer to “Auto picture in picture” on page 164 and set “AUTO P IN P” to
“OFF”.
2.
Depress the menu switch “ ” for approximately 1 second or the “F1” key
on the keyboard to display the menu.
By simultaneously pressing the keyboard’s “Shift” key and
“B.O.D.” key that is set to “P IN P”, you can jump to step 7.
For instructions on setting the “B.O.D.” key to “P IN P”, refer
to Section 5.13, “Setting a function to the keyboard”.
3.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to “B.O.D. CONTROL” (see Figure 5.89).
4.
Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.
5.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to “P IN P” (see Figure 5.113).
6.
Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.