Olympus VISERA OTV-S7V, Instructions Manual, Page: 176 / 216

170
Chapter 5 Operation
VISERA VIDEO SYSTEM CENTER OTV-S7V
3.
Refer to Section 5.13, “Setting a function to the keyboard” and set the “P IN
P” function to the “B.O.D.” key on the keyboard.
4.
Pressing the “B.O.D.” key that is set to the “P IN P” function toggles between
picture in picture on and off.
When “AUTO P IN P” is set to “ON”, if press the “B.O.D.” key
that is set to the “P IN P” function, the display on the video
monitor is shown in Figure 5.118.
Display mode
4 display modes are available by controlling the menu switches, keyboard
(optional) or remote control switch.
• OTV image only (displayed as “OTV” in the menu)
• Main-image: OTV, sub-image: other device (displayed as “OTV+ext.” in
the menu)
• Main-image: other device, sub-image: OTV (displayed as “EXT.+otv” in
the menu)
• Other image only (displayed as “EXT.” in the menu)
When “AUTO P IN P” is set to “ON”, “MODE” which can be
selected are only “OTV+ext.” and “EXT.+otv”.
 Change the display mode by pressing a remote control
switch
1.
Refer to “Auto picture in picture” on page 164 and set “AUTO P IN P” to
“OFF”.
2.
Refer to “Switch mode” on page 167 and set “SWITCH MODE” to
“MODE–CHANGE”.
3.
Refer to Section 5.12, “Remote control switches” and set the “P IN P”
function to a remote control switch on the camera head or videoscope.
4.
Pressing the remote control switch toggles between “OTV+ext.” and
“EXT.+otv”.
When “AUTO P IN P” is set to “ON”, if press the remote
control switch that is set to the “P IN P” function, the display
on the video monitor is shown in Figure 5.118.