Olympus VISERA OTV-S7V Instructions Manual Download Page 54 | Manualshive

Page: 54 / 216

Olympus VISERA OTV-S7V Instructions Manual Download Page 54

48

Chapter 3 Installation and Connection

VISERA VIDEO SYSTEM CENTER OTV-S7V

2.

Insert the PC card adapter (MA-2E, MAPC-10) into the OTV-S7V’s PC card
slot until it stops (see Figure 3.19).

Figure 3.19

• If the PC card adapter and Memory Card are ejected or

inserted with the power ON, Memory Card may not be
recognized by this instrument. In this case, please reattach
the PC card adapter. When it is not still recognized, please
turn the OTV-S7V OFF and then ON again with the PC card
adapter and Memory Card inserted.

• Please use so as not to fill the capacity of Memory Card.

The image of SmartMedia is recommended to be moved to
PC etc., regulaly.



Disconnecting

1.

Hold the OTV-S7V stationary with one hand and push the eject switch.
Then, the eject switch is poped up (see Figure 3.20).

Figure 3.20

PC card slot

PC card adapter

Eject switch

OTV-S7V

PC card adapter

Eject switch

«
...
52
53
54
55
56
...
»

Summary of Contents for VISERA OTV-S7V

























































































































































































































Reviews:

No comments