18.5.1 ORCA monochrome camera
If your VS200 kit contains an ORCA Flash 4.0 or ORCA Fusion VS200 camera you
need to manually add it to the device list as those two cameras are not part of the
default setup.
1. Open the [
Device List
] dialog box and go to the [
Camera
] tab.
2. In the [
Camera 2
] list select either the ORCA Flash 4.0 or ORCA Fusion
VS200.
3. Make sure that the correct camera adapter magnification (1.0x) is selected
in the [
Device Settings
] dialog box. To open the [
Device Settings
] dialog
box use the [
Acquire
] > [
Devices
] > [
Device Settings
] command.
As none of the ORCA cameras are part of the default device configurations each
observation method uses an ORCA camera needs to be adjusted manually. See
Device customization auf Seite 90
for further information.
18.6 Device customization
In the [
Device Customization
] dialog box you can make changes to existing obser-
vations methods. For example, you can add a different monochrome camera or you
can add new observation methods.
- 90 -
Instructions for use
18 VS200 device configuration
OLYMPUS VS200 System
