Transportation lock (4)
ATTENTION
The transportation locks must be remounted each time before the unit is trans-
ported. Make absolutely sure not to lose the transportation locks and the
mounting material.
Hex screwdriver (size 3 mm)
1. Remove the red transportation lock from the brass colored counterweight
of the SCARA robot arm. To do this, loosen the 3 hex screws (size 3 mm)
indicated in the figure.
Make sure that the screws to do not fall inside the housing.
The unit of SCARA robot arm and counterweight can now move freely.
- 36 -
Instructions for use
9 Unboxing
OLYMPUS VS200 System
