4. Insert the filter into an empty position. Make sure that you orient the filter
correctly when you insert it.
Refer to the U-FFWR instruction manual for more information.
The correct orientation for Semrock emission filters is with the
arrow towards the camera.
The correct orientation for Chroma emission filters is with the
arrow pointing away from the camera.
5. Write down the position number of the filter as you will need it later.
6. Configure the filter in the VS200 ASW software. To do this, open the
[
Device Settings
] dialog box. You can open this dialog box in the [
Manual
control
] layout.
7. Click the [
Previously Used Layout
]
button to go to a different layout.
You can find the [
Previously Used Layout
] button at the top right in the nav-
igation bar on the software's start page.
8. At the top right, on the menu bar click the [
Manual control
] button.
9. Select the [
Acquire
] > [
Devices
] > [
Device Settings
] command to open the
[
Device Settings
] dialog box.
- 48 -
Instructions for use
11 Mounting fluorescence components
OLYMPUS VS200 System
