12 Assembly of the housing for scanner
The left side panel has two black quick lock pins (1) at the top and two rubber
ring sockets (2) near the bottom. Additionally it has two connectors (3) for the
grounding flags which need to be connected with the cables coming from the
VS200 frame.
On the left side of the VS200 scanner you find two quick locks sockets (1) at
the top and two small pins (2) close to the bottom as well as two grounding
flag connectors with cables attached (3).
1. Place the panel next to the system and connect the two grounding flags to
the side panel first.
2. Mount the side panel so that the rubber rings of the panel fit onto the small
pin on the VS200 system.
3. Once the pins are inside the rubber rings push the panel towards the frame
and finally push it down so that the black quick lock pins of the side panel fit
- 63 -
Instructions for use
OLYMPUS VS200 System
