16
1. Enable Bluetooth.
(Start > Settings > Control Panel > IR-Bluetooth)
2. Tap “OK”
3. “Bluetooth Selected” pop-up window will
appear. Tap “OK”.
4. R1018 will auto perform soft reset.
5. Make a new Connection: “XXXX”.
(Start > Settings > Control Panel > Network and
Dial-up Connections)
6. Select “Dial-Up Connection”. Tap “Next”.
7. Select “Bluetooth Modem on COM5”.
8. Tap on “Configure”. Set Baud Rate to 115200.
9. Go to “Call Options” tab. Deselect “Wait for
dial tone before dialing”
10. Tap “OK” to set the configuration for “Port
Settings” and “Call Options”
11. TCP/IP settings to be confirmed for different
models of mobile phone.
12. Tap “OK” on pop-up confirmation window.
13. Tap “Next”.
14. Input “65” for country / region code (for
Singapore. Leave the area code blank)
15. Enter a phone number “*99***X#”
Note:
‘X’ is the CID number that can be found on
the mobile phone. Phone number is obtained
from the GPRS subscriber. In this example, the
phone number is the singtel number.
16. Tap “Finish”.
17. Double tap on the new connection
icon ”XXXX”, that has been just created.
18. Tap “Dial Properties”.
19. Tap “Edit”.
20. Enter the following Dialing Patterns:
•
For local Calls: G