E-20
Load the digital camera.
Open the Case.
Insert the buckle opener of the accessory into the buckle opening
lever as shown in the figure (in direction
) Pull the buckle opener
slowly (in direction
②
). When not using the buckle opener, hold the
buckle opening lever with your thumb and index finger from the side
and pull it up slowly.
Make sure that the digital camera
is turned OFF. Align the projecting
part of the camera's zoom lever
with the notch on the case's zoom,
then insert the camera gently into
the case.
:
• Confirm that the projecting part of the zoom lever of
the digital camera is set securely to the zoom lever
notch on the inside of the Case. When the setting is
not secure, the loading of the digital camera is not
complete and closing of the rear lid of the Case may
not be possible or zoom may not function even when
the zoom lever is operated.
• Insufficient sealing will cause water leakage.
CAUTION
Prepare the camera
Check the operation of the camera.
Confirm the operation according to the instruction manual for the
digital camera.
Applicable digital cameras:
This case (PT-027) is designed for use exclusively with CAMEDIA
C-7070 Wide Zoom/C-5060 Wide Zoom digital cameras.
PT̲027EFDS̲E.qxd 2005.4.28 4:59 PM ページ E-20
