24
Chapter 3 Installation and Connection
ELECTROSURGICAL UNIT PSD-30
Chapter 3 Installation and Connection
Prepare the electrosurgical unit and compatible equipment (shown in the
“System chart” in the Appendix) before each use, and refer to the instruction
manuals of each system component. Install and connect the equipment as
follows:
3.1
Installation of equipment
• Install the unit on a stable, level surface. Otherwise, the unit
could fall, causing equipment damage and/or injury to the
operator or patient.
• If the electrosurgical unit is placed on a cart, the cart must be
of adequate strength and size to hold the unit securely.
• Never place the electrosurgical unit on its side or upside
down. Otherwise, the electrosurgical unit does not work
correctly.
Place the instruction manual near the electrosurgical unit or
in another easily accessible place.
1.
Ensure that the operation of the electrosurgical unit is in accordance with
the precautions described in “Dangers, warnings and cautions” on page 5.
2.
Place the electrosurgical unit on a level, stable bench or cart.