![background image](http://html2.mh-extra.com/html/olympus/ir-500/ir-500_reference-manual_4286164051.webp)
51
Using the flash
u
!
#
$
Chap
te
r
4:
S
e
tt
ing accordi
ng t
o
s
h
oot
ing condi
tio
n
s
Using the flash
u
!
#
$
The camera is initially set to “AUTO” (auto-flash), but you can select from the following five
flash modes according to the shooting conditions.
AUTO (default setting)
The flash fires automatically in low light or backlight conditions.
u
(soft flash)
The flash is weakened. This is effective when “AUTO” or “
#
” (fill-in flash) is too strong and
too bright.
!
(red-eye reduction flash)
The light from the flash may make the subject’s eyes appear red in pictures taken in dark places.
The red-eye reduction flash mode reduces this phenomenon by emitting pre-flashes before firing
the regular flash.
#
(fill-in flash)
The flash fires regardless of the available light. This mode is useful for eliminating shadows on
the subject’s face (such as shadows from tree leaves), in a backlight situation, or for correcting
the color shift produced by artificial lighting (especially fluorescent light).
Notes
•
After the pre-flashes, it takes about one second until the picture is taken. Hold the camera firmly to
avoid camera movement.
•
Effectiveness may be limited if the subject is not looking directly at the pre-flashes, or if the shooting
range is too far. Individual physical characteristics may also limit effectiveness.
00E Adam .book Page 51 Tuesday, November 9, 2004 3:24 PM