![background image](http://html2.mh-extra.com/html/olympus/ir-500/ir-500_reference-manual_4286164229.webp)
229
If a problem arises
Ch
ap
ter 10:
O
th
ers
The card is full.
Erase unnecessary images or replace
the card with a new one. If you do not
want to erase any image, transfer the
images on the card to your computer
before erasing the image data on the
card.
P.127
P.215
The battery has run out during shooting
or storing image data on the card (the
monitor has turned off after
“BATTERY EMPTY” was displayed).
Charge the battery (if the card access
lamp is blinking, wait until the card
access lamp goes off before charging).
P.33
The whole memory gauge is lit.
Wait until the top of the memory gauge
goes off.
P.28
(
The monitor has turned off.
The power is off.
The camera automatically turns off if
you leave the camera for some time.
Turn on the camera by opening the
multi-swing display or pressing the
power switch.
P.36
(
Colors in the monitor look distorted while the camera is focusing on a subject.
When you press the shutter button in
half way, the colors in the monitor may
look distorted.
It is not a malfunction. The colors will
appear correctly after the focus is on.
—
(
The flash does not fire.
“FLASH MODE” is set to “
$
” (flash
off).
Set “FLASH MODE” to other than
“
$
” (flash off).
—
Possible cause
Corrective action
Ref.
page
00E Adam .book Page 229 Tuesday, November 9, 2004 3:24 PM