![background image](http://html2.mh-extra.com/html/olympus/ir-500/ir-500_reference-manual_4286164230.webp)
230
If a problem arises
Ch
ap
ter 10:
O
th
ers
The subject is bright enough.
If you want the flash to fire every time
you shoot, set “FLASH MODE” to
“
#
” (fill-in flash).
P.51
The mode dial is set to
n
(movie
shooting mode).
The flash cannot be used while the
mode dial is set to
n
. Set the mode
dial to
j
,
k
,
i
,
n
,
o
,
or
l
.
—
(
The battery is consumed quickly.
The battery was not fully charged.
Charge the battery until the power lamp
goes off.
P.33
The camera is used in a cold place.
The battery runs out fast at cold
temperatures. Let the camera stay in
warm condition, for example, by
keeping the camera inside your outfit or
cloth.
—
The battery level does not appear
correctly.
If the rate of battery consumption has
changed tremendously, the camera may
turn off the power without the low
battery warning. Charge the battery.
P.33
(
The monitor is hard to see.
Vertical lines appear on the monitor.
If you aim the camera at strong light or
a very bright subject, vertical lines may
appear on the monitor. It is not a
malfunction.
—
The brightness of the monitor is not
adjusted properly.
Adjust the monitor’s brightness with
the “
s
” (monitor brightness
adjustment) settings of the setup menu.
P.167
Possible cause
Corrective action
Ref.
page
00E Adam .book Page 230 Tuesday, November 9, 2004 3:24 PM