![background image](http://html2.mh-extra.com/html/olympus/ir-500/ir-500_reference-manual_4286164222.webp)
222
Ch
ap
ter
9:
Usi
n
g
i
mag
es w
it
h
yo
u
r co
mp
u
ter
Transferring and storing camera images to a computer without using
OLYMPUS Master
Transferring and storing camera images to
a computer without using OLYMPUS Master
This camera is supported by USB Mass Storage Class Device Standards. Therefore, you can
transfer and store images by connecting the camera to a computer with the supplied USB cable
without using OLYMPUS Master. The connection environment of the USB cable is as follows:
Windows:
Windows 98/98SE/Me/2000 Professional/XP
Macintosh:
Mac OS 9.0–9.2/X
Notes
•
Under the environment shown below, we cannot guarantee proper operation even if it is equipped with the
USB connector.
- Windows 95/NT 4.0
- Windows 98/98SE when upgraded from Windows 95
- Mac OS 8.6 or lower versions (only for Mac OS 8.6 originally equipped with USB connector and USB
MASS Storage Device Support 1.3.5 is confirmed for proper operation.)
- Computer with an add-on USB connector on an expansion card, etc.
- Computers without a pre-installed Operating System or a self-built computer
•
A USB driver should be installed if you use Windows 98/98SE. Before connecting the camera and a
computer, double-click [INSTALL.EXE] to install the USB driver from the folder (indicated below) on the
supplied OLYMPUS Master CD-ROM.
(The Drive name of your computer):\USB
00E Adam .book Page 222 Tuesday, November 9, 2004 3:24 PM