GX41
21
10
ASSEMBLY
10-1 Assembly Diagram
The diagram below shows the assembly sequence for various modules. The numbers in indicate the order of assembly.
Refer to the instructions, given according to these numbers, in the detailed assembly procedure on the subsequent pages.
# When assembling the equipment, make sure that all parts are free of dust and dirt. Avoid scratching any parts or glass
surfaces.
# Keep the provided Allen wrench on hand. You will need it when replacing the modules.
Eyepieces
WHB10X/10X-H
(for U-CBI30-2/CTR30-2)
WHN10X/10X-H
(for U-BI30-2/TR30-2/TBI-3)
Observation tube
U-CBI30-2
U-BI30-2
U-CTR30-2
U-TR30-2
U-CTBI
U-TBI-3
Intermediate
attachment**
Eye point
adjuster
GX41-EPA
Tilting
binocular
observation
tube
CKX-TBI
Stage center plate
GX-CP
IX2-GCP
IX-CP50
Stage Plate
CK40M-CP
Stage plate
holder
(AB4488)
Microscope
frame
GX41F
Objectives
MPlan series
Power cord
Lamp
socket
cord
Halogen
bulb
6V30WHAL-L
6V30WHAL
Lamp
socket
U-LS30-4
Light guide
LG-SF
Light guide
adapter
SZX-TLGAD
Light source
LG-PS2
Mechanical
stage*
CK40-MVR
(Note) The CKX-TBI and U-CTBI tilting tubes can use only the eyepieces provided with them. (Otherwise, the illumination at the
periphery of the field of view will be insufficient.)
*
The CK40-MVR mechanical stage can also be mounted on the left side. However, the feed rings will be positioned on the
far side on the left.
The mechanical stage is provided with the stage plate holder, 35 mm petri dish holder and slide glass holder.
When setting a specimen on the mechanical stage, see
1
“Placing the Specimen" on page 7.
**
One of the following intermediate attachments can be mounted by dismounting the observation tube mount and attaching
the GX41-EPA eye point adjuster:
Applicable intermediate attachment: U-CA, GX-SPU, U-EPA2, U-ECA, U-DA or U-DO3.
# For the U-DA/U-DO3, see the cautions in paragraph
8
.
Summary of Contents for GX41
Page 4: ......