Olympus FlexoFORM User Manual Download Page 13

Page: 13 / 94

10-003591-01EN [Q7780031], Rev. 4, January 2020

Important Information — Please Read Before Use

Important Information — Please Read Before Use

Intended Use

The FlexoFORM scanner is designed to perform nondestructive inspections on
industrial and commercial materials.

Do not use the FlexoFORM scanner for any purpose other than its intended use. It
must never be used to inspect or examine human or animal body parts.

Instruction Manual

This instruction manual contains essential information on how to use this Olympus
product safely and effectively. Before using this product, thoroughly review this
instruction manual. Use the product as instructed.

Keep this instruction manual in a safe, accessible location.

WARNING

Summary of Contents for FlexoFORM































































































Search results

Summary of Contents for FlexoFORM

Reviews:

Related manuals for FlexoFORM

Brands by name

Popular brands

Olympus FlexoFORM, User Manual

Search results

Summary of Contents for FlexoFORM

Reviews:

Related manuals for FlexoFORM

Brands by name

Popular brands