Olympus E-5, Instruction Manual

Page: 98 / 172

98
EN
7
P
lay
back functi
on
s
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x
Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images.
g
“RAW+JPEG
ERASE” (P. 115)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored.
g
“Protecting images” (P. 97)
Single-frame erase
1
Display the images you want to erase and press the
D
button.
2
Use
ac
to select [YES], then press the i button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1
Display the images you want to erase and press the
i
button.
• The selected images will be shown with
v
.
• To cancel your selection, press the
i
button again.
• Press
p
to select the images you want to erase and press the i button.
2
After you have selected the images to erase, press the
D
button.
3
Use
ac
to select [YES], then press the i button.
All-frame erase
1
MENU
[
W
] [CARD SETUP]
2
Use
ac
to select [ALL ERASE], then press the i button.
3
Use
ac
to select [YES], then press the i button.
• All frames will be erased.
To erase immediately:
j
If you have set “QUICK ERASE” (
g
P. 115) to [ON] , pressing the
D
button will erase an image
immediately.
j You can set the initial position of the cursor to [YES] . g “PRIORITY SET” (P. 116)
Erasing images
TIPS
D
button
s0033_e_00_0_unified.book 98 ページ ２０１０年１１月１６日 火曜日 午後５時２４分