manualshive.com logo in svg

Olympus E-5, Instruction Manual

Share
Download
Olympus E-5 Instruction Manual Download Page 137

137

EN

13

In

fo

rma

tio
n

z

Use the single Olympus lithium-ion battery (BLM-5). Do not use other than Olympus 
genuine battery. The BLM-1 can be used, however be sure to use the dedicated charger 
(BCM-1 or BCM-2) when charging it. We recommend using BLM-5.

z

The camera’s power consumption varies widely with usage and other conditions.

z

As the following consume a lot of power even without shooting, the battery will be drained 
quickly.
• Performing auto focus repeatedly by pressing the shutter button halfway in shooting 

mode.

• Using live view.
• Displaying images on the LCD monitor for a prolonged period.
• When connected to a computer or printer.

z

When using a drained battery, the camera may turn off without the low battery warning 
being displayed.

z

The battery will not be fully charged at the time of purchase. Charge the battery using the 
provided charger (BCM-5) before use.

z

The normal charging time using the provided charger is approximately 3.5 hours 
(estimated).

z

When charging the provided battery, never use the charger other than the dedicated one. 
Also do not use the provided charger for any battery other than the dedicated one.

z

The charger can be used in most home electrical sources within the range of 100 V to 240 
V AC (50/60Hz) around the world. However, depending on the country or area you are in, 
the AC wall outlet may be shaped differently and the charger may require a plug adapter to 
match the wall outlet. For details, ask at your local electrical shop or travel agent.

z

Do not use commercially available travel adaptors as the charger may malfunction.

Battery and charger

Using your charger abroad

s0033_e_00_0_unified.book  137 ページ  ２０１０年１１月１６日　火曜日　午後５時２４分

Summary of Contents for E-5













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands