Olympus E-5, Instruction Manual

Page: 57 / 172

57
EN
3
Focusing
and sho
o
ting
fu
nct
ions
• When the button is released, the currently selected AF
target lights. When
M
or
N
is set, you can select the
AF target to be used at that point. For operation, refer to
Step 2 in “Selecting the AF target position” (
g
P. 57)
in the next section.
• When
M
or
N
is set, you can turn the dial to select
the AF target.
• When
M
or
N
is set, you can select the AF target with
p
.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the P button and release your finger to enable selection of the AF target.
2
Use the main dial/sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac , and use the sub dial to perform the same
operation as
bd
.
• Press the i button to return the position of the AF target
to the center.
Selecting the operation when the AF target is selected:
j
You can change the operation of the dials and arrow pad for selecting the AF target.
g
“
P
SET UP” (P. 102)
Selecting the position of the AF target with the arrow pad without pressing the
P
button:
j
Press the shutter button halfway and release it, then use the arrow pad to change the position of
the AF target.
g “BUTTON FUNCTION” (P. 106)
Performing AF with the specified point:
j
You can perform AF with the position and size of the enlargement frame.
g
“Enlarged display operation” (P. 40)
x
Notes
• While shooting using live view, the dynamic-single target AF mode cannot be used.
Direct button
P
+
j
/
k
Super control panel i
p
: [AF AREA]
P
+
k
Menu
MENU
[
c
] [
R
] [AF AREA]
TIPS
P button
i
button
k
MENU
button
j
AF
button
s0033_e_00_0_unified.book 57 ページ ２０１０年１１月１６日 火曜日 午後５時２４分