Olympus E-5, Instruction Manual

Page: 86 / 172

86
EN
P
lay
back functi
on
s
7
7
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g
“REC VIEW” (P. 99)
1
Press the
q
button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use
bd
or
k
to select images you want to view.
You can also turn
j
to switch to
U
for close-up
playback.
• You can switch the operations of both dials.
g
P. 104
Single-frame/Close-up playback
q button
INFO
button
p
<
button
j
[4032x3024,1/8] [4032x3024,1/8]
2010.09.01 2010.09.01 21:56 21:56
100-0015 100-0015
15 15
L N N
15 15 15
JPEG
R
m
JPEG EDIT
P
SET BACK
Press
bd
to view frame-
by-frame close-ups.
When
[ g FACE DETECT]
is set to [ON] , press ac
to move to another face in
close-up position.
Press
p
to move the display
of the close-up position.
When
[
g
FACE DETECT]
(
g
P. 38) is set to [ON] , a
frame is displayed around a
detected face. Press
i to
move the frame to another
face.
Press
p
to change the
close-up position.
(Single-frame
playback) (Close-up frame-by-frame playback)
d : Displays the next frame
b
: Displays the previous frame
(Close-up position playback)
(Close-up playback)
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the
<
button
• Plays back the image at a 10×
magnified close-up position.
• The menu for the displayed
image type is displayed.
i button
INFO
INFO/Fn
INFO/Fn
U
G
Fn
s0033_e_00_0_unified.book 86 ページ ２０１０年１１月１６日 火曜日 午後５時２４分