![background image](http://html1.mh-extra.com/html/olympus/dz-100/dz-100_instruction-manual_734231025.webp)
25
EN
Image size
Sets the number of recording pixels.
4608×3456
Suitable for printing pictures over A3 (11×17 in.).
4
3200×2400
Suitable for printing pictures up to A3 (11×17 in.).
3
1920×1440
Suitable for printing pictures up to A4 size (8.5×11 in.).
7
640×480
Suitable for using pictures on emails.
Aspect
Sets the horizontal-to-vertical ratio of images.
4:3
Change the horizontal-to-vertical ratio to 4:3 when taking pictures.
P
16:9
Change the horizontal-to-vertical ratio to 16:9 when taking pictures.
Q
3:2
Change the horizontal-to-vertical ratio to 3:2 when taking pictures.
1:1
Change the horizontal-to-vertical ratio to 1:1 when taking pictures.
●
In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting
mode” (p. 58)
●
The image sizes are the examples when the aspect ratio is set to [
].
Registering one touch white balance
Registering one touch white balance
Select [
One Touch 1] or [
One Touch 2], face the camera toward a piece of white paper or other white
object, and press the
button.
●
The camera releases the shutter and the white balance is registered. When the white balance was
previously registered, the registered data is updated.
●
The registered white balance data will not be cleared by turning off the power.
●
Perform this procedure under the light where the pictures will be actually taken.
●
When the camera settings are changed, the white balance must be registered again.
●
When the white balance cannot be registered, check that the white paper fi lls the screen, and then
perform the procedure again.
Summary of Contents for DZ-100
Page 78: ......
Page 79: ...VM816101...