Olympus DZ-100, Instruction Manual

Page: 38 / 79

38 EN
Saving the mode when the camera Saving the mode when the camera
is turned off
is turned off
dd
[Keep [Keep
z z
Settings] Settings]
Submenu 2 Application
Yes
The shooting mode is saved
when the camera is turned off and
is reactivated the next time the
camera is turned on.
On
The shooting mode is set to
P
mode when the camera is turned
on.
Selecting the camera sound and Selecting the camera sound and
its volume
its volume
dd
[Sound Settings] [Sound Settings]
Submenu 2 Submenu 3 Application
Sound Type
1/2/3
Selects the camera
sounds (operation
sounds and shutter
sound).
Volume
0/1/2/3/4/5
Selects the operation
volume of camera
buttons.
q
Volume
0/1/2/3/4/5
Selects the image
playback volume.
d
Camera Menu 2
Adjusting the image processing Adjusting the image processing
function
function
dd
[Pixel Mapping] [Pixel Mapping]
●
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
●
For best results, wait at least one minute after
taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the
A
button when [Start] (Submenu 2) is
displayed.
●
The check and adjustment of the image
processing function starts.
Adjusting the brightness of the Adjusting the brightness of the
monitor
monitor
dd
[ [
s s
]]
To adjust the monitor brightness To adjust the monitor brightness
1
Use
FG
to adjust the brightness while viewing
the screen, and then press the
A
button.
MENU Back
s