![background image](http://html1.mh-extra.com/html/olympus/dp20-5e/dp20-5e_instructions-manual_734206033.webp)
29
DP20
PLAYBACK FUNCTION SETUP/CONTROL (PLAY)
6-1 Operations Using the Control Box Buttons (PLAY)
}After installing the CF card, set the main switch @ to “ ” (ON) and confirm that the POWER indicator LED ² lights up.
(The display shows an image in about 5 seconds after the indicator ² lights up.)
1. Press the INFO (recording information) button ³ to display or hide the
INFO display alternately.
To perform setups, it is required to display the INFO display.
(Factory setup: INFO display ON.)
2. When the MODE button | is pressed to select PLAY, the recording
information for playback is displayed.
}Press the MODE button @ to switch the mode between REC AUTO
(auto recording), REC MANUAL (manual recording) and PLAY (playback).
1. Select PLAY mode.
The display plays the last picture recorded in the CF card.
However, if the played picture is the index display, the picture in the
position of the green cursor is displayed.
The INFO display shows the folder name ² and file name ³.
2. Press either cross-cursor button or | to select the played picture.
(If the button is pressed on the index display, the button moves the
cursor.)
Each press of a button plays the picture located before or after the
current picture. The play speed is variable depending on picture sizes.
}It is also possible to play the pictures by advancing them frame by
frame at a set interval (1 sec., 5 sec., 10 sec. or 30 sec.) just like a
slideshow (see page 32).
1
Setting the INFO Button
(Fig. 16)
Fig. 16
1
2
3
4
Fig. 17
1
2
3
4
2
Setting the MODE Button
(Fig. 17)