1
DP20
# To prevent electric shock and malfunction, never disconnect or connect a connection cable
while the main switch is “ ” (ON).
1. Be sure to set the main switch of the control box to “ ” (OFF) before connecting or disconnecting the connection cables
and power cord.
When connecting a cable equipped with lock screws, tighten them firmly and ensure that the connector will not slip out
before setting the main switch to “ ” (ON).
2. Always use the specified AC adapter only.
Using another AC adapter will prevent the camera system from operating at optimum levels and may also cause it to
malfunction as well as a fire or burns due to abnormal heating.
3. The cords and cables are vulnerable to bend or twist. Do not apply excessive force to them.
Lay the power cord and camera cable so that they do not come in contact with a heat generating module such as the
lamp housing of the microscope.
4. To prevent the microscope from toppling down, avoid using microscope attachments that may make the total height of
the microscope above 1 meter when they are attached.
5. The AC adapter and the bottom of the control box generate heat after long hours of use. To prevent low-temperature
burning of your skin, be careful not to leave your skin in extended contact with those modules.
6. Connect the provided power cord correctly and ensure that the
grounding terminal
of the power supply and that of the
3-conductor wall outlet are properly connected. If the equipment is not grounded, Olympus can no longer warrant the
electrical safety performance of the equipment.
IMPORTANT
The DP20 microscope digital camera is designed to be connected to a TV adapter mounted on an
Olympus UIS2/UIS type optical microscope for use in quick recording of images.
The DP20 microscope digital camera can manifest the intended optical performance fully when it is
used in combination with an Olympus TV adapter.
SAFETY PRECAUTIONS
Safety and Operation Symbols
The following symbols are found on the control box of the system.
Study the meanings of the symbols and always use the equipment in the safest possible manner.
Symbol
Explanation
Before use, carefully read the instruction manual. Improper use could result in personal injury
to the user and/or damage to the equipment.
Indicates “ ” (ON) or “ ” (OFF) of the main switch.
Use the specified AC adapter (6 V, 2.5 A DC)
Symbols representing an input connector, display, and USB connector respectively.
Symbol representing the camera head connector.
,