![background image](http://html1.mh-extra.com/html/olympus/dp20-5e/dp20-5e_instructions-manual_734206023.webp)
19
DP20
}This item selects whether or not a picture is displayed for
review during the period in which it is recorded I the CF card.
· After selecting item QUICK REV, press either cross-cursor
button or to select “AUTO”, “5 sec.” or “OFF”.
· When “AUTO” is selected, the display shows the picture during
recording.
· When “5 sec.” is selected, the display shows the picture only
for 5 seconds.
· When “OFF” is selected, the picture being recorded is not
displayed so this setting is suitable for use during successive
photographing of multiple pictures.
Auto white balance
One-touch white balance
Color temperature
setting
}The one-touch white balance setting is also available using
the OTWB button on the control box (see page 15).
}The white balance (WB) setting makes it possible to record
pictures by eliminating the effects of the surrounding light.
According to specimen and brightness, the optimum white
balance may not be obtained with AUTO white balance setting.
In such case, use OTWB (One-Touch White Balance) to let
the camera store the illumination condition in memory.
Manual white balance is also available, allowing you to set
the color temperature manually.
QUICK REV
SLEEP
}When this item is set to other option than “OFF”, the display turns off after the selected time period has elapsed
when you perform on operation on the camera system.
· After selecting item SLEEP, press either cross-cursor button or to select “OFF”, “1 min.”, “5 min.” or “10 min.”.
· When “OFF” is selected, the SLEEP function is deactivated.
When the measurement results are saved, the live image updating is interrupted for about 3 seconds even when
SLEEP is set to “OFF”.
4
Setting the White Balance
Factory setup: AUTO.
When manual white balance is selected, the current color temperature should be set by pressing either cross-cursor
button or .
(Factory setup: 5500K)
(The color temperature can be set to 3000K, 3700K, 4000K, 4500K, 5500K or 6500K.)
5
Setting the Power Supply
Factory setup: QUICK REV:5 sec./SLEEP:OFF
AUTO
5 sec.
OFF
OFF
10 min.
5 min.
1 min.