10
Always use a power supply with the specified voltage.
Do not operate the camera system when any of the connectors
and plugs of the AC adapter and power cord is not completely
inserted.
Never insert or remove the power cord’s plug or connector with
a wet hand.
If the AC adapter or cord is excessively hot or is emitting smoke
or odor, immediately stop using the camera system and remove
the power cord’s power plug from the power outlet.
Also immediately contact Olympus.
Never attempt to power the camera system using an AC adapter
other than the provided. Doing so could cause a failure in the
control box or camera head or result in an unexpected accident
such as a fire.
Out warranty cannot cover problems caused by the use of an
AC adapter other than the exclusive AC adapter provided with
the system.
Never pull, bend or twist the AC adapter cord or power cord
excessively or try to extend the power cord.
If the AC adapter cord or power cord is damaged or
disconnected or there is a contact failure in a connector or plug,
immediately contact Olympus.
Be sure to unplug the power cord from the power outlet whenever
the unit is not in use.
Do not use a multiple-outlet power sockets or several extension
power cords. Otherwise, an accident such as a fire may result.
To disconnect the AC adapter
Fig. 6
1
2
Set the main switch @ of the control box to “ ” (OFF), confirm that the
POWER indicator LED ² is turned off completely (in about 1 sec.), remove
the AC adapter’s output connector from the control box then remove
the power cord’s plug from the power outlet.
# Do not disconnect the connector while the indicator POWER LED
² is lit, as this may cause malfunction.
CAUTION