Olympus CV-180 Instructions Manual Download Page 49 | Manualshive

Page: 49 / 296

Olympus CV-180 Instructions Manual Download Page 49

Chapter 4 Operation

41

EVIS EXERA II VIDEO SYSTEM CENTER CV-180

Chapter 4 Operation

This chapter explains the work flow of endoscopic observation using the video
system center. For information on how to use the functions that are not
explained in this chapter, refer to the reference pages.

The operator of the video system center must be a physician or medical
personnel under the supervision of a physician and must have received sufficient
training in clinical endoscopic techniques. This manual, therefore, does not
explain or discuss clinical endoscopic procedures. It only describes basic
operation and precautions related to the operation of the video system center.

• Be sure to wear protective equipment such as eye wear, face

mask, moisture-resistant clothing and chemical-resistant
gloves that fit properly and are long enough so that your skin
is not exposed. Otherwise, dangerous chemicals and/or
potentially infectious material such as blood and/or mucus of
the patient may cause an infection.

• Should any irregularity is observed, do not use the video

system center. Damage or irregularity may compromise
patient or user safety and may result in more severe
equipment damage.

• Anytime you observe an abnormality in a video system

center function, stop the examination immediately and take
action according to the following procedures. Using a
defective video system center may cause patient and/or
operator injury.



If the endoscopic image disappears or if the image
freezes and cannot be restored, press the “RESET”
button or temporarily turn the video system center OFF
and wait for about 10 seconds. Then turn it back ON
again.
For ancillary equipment used in conjunction with the video
system center, also turn the power OFF and then ON
again as directed in their respective instruction manuals. If
this fails to correct the problem, immediately stop using
the equipment and turn the video system center and light
source OFF. Then, gently withdraw the endoscope from
the patient as described in the endoscope's instruction
manual.

«
...
47
48
49
50
51
...
»

Summary of Contents for CV-180









































































































































































































































































































Reviews:

No comments